Which instruments is used to testing insulation
What is recommended approach of disposal of waste oil?
Emergency that can occur in the engine room
The inlet valve on the cylinder head of a diesel engine is provided entry of_________
The Function of pumps is to:
Settling tanks on ship are provided for
The purpose of injector on the cylinder head of a diesel engine is to
Before re starting the machine following precaution to be taken mark incorrect one
Cross head type engine doesn’t have piston rod between piston and connecting rod
Trunk type engine have piston rod between piston and connecting rod
Steam from a boiler is used for heating:
Which material is commonly used for insulation of boiler furnace
Which is not the part of fridge and air conditioning system?
Given picture is of which equipment
Which is not the part of fridge and air conditioning system?
The function of hydrophore system is to supply
Too short arc length will cause an uneven bead due to arc failure
The function of electrode dryer is to wet the electrode that have been exposed to the humid atmosphere
Engine room ventilation falls under 2 major categories
Don’t in the workshop….Mark incorrect one
The following set of tools are used for making holes in
Dry full contact body resistance is about ____ohms at 250 v
Quick closing valve can be operated by
The long arc length will cause
The given below components are of
Macerator pump is a component of
The function of electrode dryer is to
Drain valve are provided on air bottle to remove
Turbo alternator is a generator operating on steam produced from waste heat of main engine
Each tank is required to have at least the following
Very useful topic
——
italy virtual number
Answer