The Function of pumps is to:
Which instruments is used to testing insulation
Engine room ventilation falls under 2 major categories
Turbo alternator is a generator operating on steam produced from waste heat of main engine
Too short arc length will cause an uneven bead due to arc failure
Which is not the part of fridge and air conditioning system?
The function of hydrophore system is to supply
The function of electrode dryer is to wet the electrode that have been exposed to the humid atmosphere
Steam from a boiler is used for heating:
What is recommended approach of disposal of waste oil?
Settling tanks on ship are provided for
Given picture is of which equipment
Which material is commonly used for insulation of boiler furnace
Don’t in the workshop….Mark incorrect one
Quick closing valve can be operated by
The inlet valve on the cylinder head of a diesel engine is provided entry of_________
Dry full contact body resistance is about ____ohms at 250 v
Emergency that can occur in the engine room
Drain valve are provided on air bottle to remove
Trunk type engine have piston rod between piston and connecting rod
The long arc length will cause
Cross head type engine doesn’t have piston rod between piston and connecting rod
The following set of tools are used for making holes in
The function of electrode dryer is to
Before re starting the machine following precaution to be taken mark incorrect one
The given below components are of
Macerator pump is a component of
Which is not the part of fridge and air conditioning system?
The purpose of injector on the cylinder head of a diesel engine is to
Each tank is required to have at least the following
it was great
Good question
dry full contact body resistance and forced draft are wrong answer
What is correct answer. Please let us know so we can change it. Thank you for your feedback
Good
Dry full contact body resistance is about ____ohms at 250 v
This question’s answer is c) 2000
Please change the answer.