Steam from a boiler is used for heating:
Turbo alternator is a generator operating on steam produced from waste heat of main engine
What is recommended approach of disposal of waste oil?
Don’t in the workshop….Mark incorrect one
Before re starting the machine following precaution to be taken mark incorrect one
The function of electrode dryer is to
The following set of tools are used for making holes in
Dry full contact body resistance is about ____ohms at 250 v
Which is not the part of fridge and air conditioning system?
Trunk type engine have piston rod between piston and connecting rod
The function of electrode dryer is to wet the electrode that have been exposed to the humid atmosphere
Quick closing valve can be operated by
Engine room ventilation falls under 2 major categories
The long arc length will cause
Drain valve are provided on air bottle to remove
Too short arc length will cause an uneven bead due to arc failure
Given picture is of which equipment
Macerator pump is a component of
Which is not the part of fridge and air conditioning system?
Each tank is required to have at least the following
Emergency that can occur in the engine room
Which material is commonly used for insulation of boiler furnace
Cross head type engine doesn’t have piston rod between piston and connecting rod
The inlet valve on the cylinder head of a diesel engine is provided entry of_________
Settling tanks on ship are provided for
The given below components are of
The Function of pumps is to:
Which instruments is used to testing insulation
The function of hydrophore system is to supply
The purpose of injector on the cylinder head of a diesel engine is to
it was great
Best site
Vey best site for preparing G.P
Good question
dry full contact body resistance and forced draft are wrong answer
What is correct answer. Please let us know so we can change it. Thank you for your feedback
Good
Dry full contact body resistance is about ____ohms at 250 v
This question’s answer is c) 2000
Please change the answer.
Good
Good question