Task- 2.4
Task- ROR elementary stage and buoyage.
Outcome- Understood the rules of the road & the buoyage system. Lights shapes & sound signaling system was also explained in detail.
Task-2.7
Task- Take readings of dry and wet bulb thermometer, whirling psychrometer
Outcome- Understood the theory of wet bulb & dry bulb. How dew point & relative humidity is calculated using a whirling pychrometer.
Task-2.8
Task- Plot position on chart and understand modern bridge equipment.
Outcome- Understood how to use the parallel ruler & divider. How to use the navigation chart. How to plot position on the chart. Understood the basic bridge equipment.
Task-2.10
Task- Identify the mob marker
Outcome- Understood the use of a man overboard marker. Where is it located, how & when to use it.
Task-2.10
Task- Identify the mob marker
Outcome- Understood the use of a man overboard marker. Where is it located, how & when to use it.
Task- 2.11
Task- Identify SART and EPIRB
Outcome- Understood identification of EPIRB & SART. Location of EPRIB & SART. Basic functioning of EPIRB & SART.
Task-2.12
Task- Identify the basic parts of magnetic compass
Outcome- Understood the working & basic parts of wet card magnetic compass. What is basic care & maintenance of a magnetic compass
Task-2.12
Task- Identify the basic parts of magnetic compass
Outcome- Understood the working & basic parts of wet card magnetic compass. What is basic care & maintenance of a magnetic compass
Task- 2.13
Task- Recognize cardinal and inter cardinal points of compass
Outcome- Understood the cardinal & inter cardinal points of a compass. Understood boxing of a compass.
Task-2.14
Task- Compare magnetic and gyro compass and apply error
Outcome- Understood the gyro and magnetic compass and their difference and errors.
Task-2.19
Task- Demonstrate correct practice of heaving in or paying out a hawser on a warping drum
Outcome- Understood the practice if heaving in or paying out a hawser on warping drum
Task-2.20
Task– Demonstrate correct connection of mandal and tonseberg shackle
Outcome- Understood how to connect the tail to a mooring rope using a tonsberg & mandal shackle. Understanding different parts of a tonsberg & mandal shackle.
Task-2.22
Task- Hazards involved and precautions to take whilst passing tugrope.
Outcome- Understanding the procedure to make fast a tug using safe working practices. Understanding the hazards & precautions while handling tug lines.
|
Task-2.25 Task– Identify the parts of an anchor and it’s marking. Outcome- Understood the basic parts of an anchor. How an anchor chain is stored & marked. How to go for anchor stations & the precautions to be taken for anchor work.  |
Task- 3.1
Task- Identifies different types of slings and their uses.
Outcome- learnt how to identify different types of slings & their uses. How to make fast each type of sling.
Task-3.3
Task- Identify and use of bulldog grips, demonstrate joining of two wires with bulldog grips, bottle screws, and wire lashing for securing cargoes.
Outcome- Understanding use of lashing for securing cargo. Demonstrate the use of bulldog grips for joining two ropes. Demonstrate the use of bottle screws & turn buckles & where is it used.
Task-3.6
Task- Identify parts of swinging derrick/boom
Outcome- Understood how to identify the parts of a swinging derrick.Â
How to use a derrick. Maintenance of a derrick.
Task-3.9
Task – Procedure for safe hooking, slewing, hoisting, a lifting gear. Safe working practices when operating crane and derrick.
Outcome- Understood the safe working practices to be followed while operating the cranes & derricks. Limitations of derricks & cranes. Loading & discharging by derricks & cranes.
Task-3.10
Task- Identifies the lifting gear and know its s.w.l.
Outcome-Understood the different types of lifting gear like blocks, tackles & chain blocks & how to identify its safe working load.
Task- 3.13
Task- Fetches the correct size of block for a specific S.W.L.
Outcome-learnt how to get the correct size of block for a specific load by identifying its safe working load
Task- 3.14
Task- Oil and grease the wire rope as per safety guideline
Outcome-Understood the procedure for oiling & greasing wire ropes. How to maintain the wire ropes & discarding of wire ropes.
Task- 3.15
Task- Lashing carried out on,200 ltr.drums,20 liter drums,etc
Outcome-Understood how to carry out lashing of 200 lt drums, 20 lt drums, oxygen & acetylene bottles, crates & plates.
Task- 3.17
Task- Valves overhaul on deck
Outcome-Understood how to overhaul valves on deck
|
Task- 3.18 Task- Ventilators for holds, tank maintenance Outcome-Understood the use of ventilators. Maintenance of ventilators & position of ventilators on deck. Â |
Task- 6.1
Task- Makes bend, hitch and knots.
Outcome-Understood how to tie different types of knots, bends & hitches & what is the use of each knot, bend & hitch.
Task- 6.2
Task- Demonstrates tying of all essential knots.
Outcome- understood different types of knots & hitches & their uses
Task- 6.3
Task- Measuring the diameter of the rope.
Outcome-Understood the use of a Vernier caliper & how to use it for measuring the diameter of a rope.
Task- 6.4
Task- Identify manila, polypropylene and other synthetic topes and precautions to be taken.
Outcome-understood how to identify different types of ropes such as manila, polypropylene & other synthetic ropes & what precautions to be taken while using each of these ropes.
Task- 6.5
Task- Carrying out various types of whipping
Outcome- Understood how to carry out various types of whipping & what is the use of whipping
Task- 6.6
Task- Carrying out various types of rope splices.
Outcome-Understood how to carry out various types of rope splicing & what is the use of splicing.
Task- 6.8
Task- Uncoil and lay out a new coil of rope.
Outcome-Understood how to uncoil & lay out a new rope when it is received onboard so that it does not get damaged
Task- 6.9
Task- Care and maintenance of natural and synthetic ropes
Outcome- Understood the care & maintenance of natural & synthetic fiber ropes. How to store different types of ropes.
Task-6.11
Task- Splice a permanent eye on the end of wire rope.
Outcome – Understood how to make a permanent eye on the end of a wire rope & what are the precautions to be taken.
Task-6.16
Task- Inspection of rope and defects and criteria for rejection and replacement
Outcome- Understood the procedure for inspection of ropes & when a rope has to be discarded
Task- 6.18
Task- Identify various types of blocks and tackles.
Outcome-Understood the various types of blocks & tackles & how to use them
Task- 6.19
Task- Opening and maintenance of one set of block.
Outcome-Understood the procedure for overhauling a cargo block
Task- 6.20
Task- Identify and understand the use of snatch block.
Outcome- Learnt how to use a snatch block. Learnt the different parts of a snatch block.
Task- 6.21
Task-Understand the relation to sheve diameter and rope diameter.
Outcome-Understood the difference between diameter of a sheave & diameter of a rope
Task-6.23
Task- Demonstrate safe practice of using eyebolts, slings, shackles, ratchet block, and chain block.
Outcome- Learnt safe working practices while using eye bolts, slings, shackles, ratchet
Block & chain block for lifting & moving heavy deck items. Understood the SWL of equipment used in lifting of loads.
Task- 6.30/6/31
Task- Taking sounding and ullage on daily basisi.
Outcome- Understood the importance of sounding & ullage & demonstrated how to take sounding & ullage.
Task- 6.32
Task- Reading of draft marks
Outcome- Learnt how to use the draft marks in meters & feet.
|
Task-6.34 Task- Understand the hazards of using chemicals. Read MSDS sheet. Outcome- Understood the hazards while using chemicals and how to use the material safety data sheet  |
Task-6.35
Task– Use high pressure water wash machine.
Outcome- Understood how to use high pressure water washing machines & precautions to be taken.
Â
Task- 6.37
Task- Rig bosuns chair and lower him-self using self-lowering hitch.
Outcome-Understood the procedure of rigging the bosun chair & the precautions to be taken.
Task- 6.38
Task- Rig the stage for working and painting over side/aloft.
Outcome- Understood the procedure of rigging the stage & the precautions to be taken while rigging the stage.
Task- 6.39
Task- To assembles and use scaffolding to work at heights.
Outcome- Understood how to assemble scaffolding & the precautions to be taken.
Task- 6.40
Task– Rig the pilot ladder embark and disembark using the same.
Outcome-Understood the parts of a pilot ladder. Understood the rigging of a pilot ladder & what precautions are to be taken.
Task -6.41
Task- Rig the rope ladder for working over side and follow safety precautions
Outcome- Understood the rigging of a rope ladder for working overside, embarking & disembarking the ladder using all safety precautions.
Task6.43
Task– Rig and climbed 5m telescopic ladder complying with safety guidelines.
Outcome- Understood the use of a 5m telescopic ladder. How to use a telescopic ladder using all safety precautions
Task- 6.45
Task- Rig and use portable ladder.
Outcome- Understood the use of a portable ladder using all safety precautions.
Task- 6.46
Task– procedure for manual lifting with actual weights.
Outcome-learnt how to lift a heavy weight manually using the correct safety precautions
Task- 6.47
Task- Climb the mast with appropriate safety measures.
Outcome-Learnt how to climb a mast using all safety precautions. Learnt how to use a safety harness
Task- 6.48
Task- Enters an enclosed space complying with safety procedure.
Outcome-understood the procedure of entering an enclosed space complying with all safety precautions
Task- 6.49
Task- rigging and maintaining ventilation system prior entry in enclosed space.
Outcome-understood the procedure of rigging & maintaining ventilation systems prior entering an enclosed space & during the stay in an enclosed space.
Task- 6.50
Task– Use gas monitor and o2 analyzer to check atmosphere in enclosed space.
Outcome- Learnt how to use gas monitoring equipment & oxygen analyzers to check atmosphere in the space.
Task- 6.51
Task- Use of multy gas detector prior entry in enclosed space.
Outcome- Learnt how to use a multi gas detector prior entering any enclosed space
Task- 6.52
Task- Use of approved permits system for enclosed space entry.
Outcome-Learnt how to use an enclosed space entry permit. Precautions to be taken before signing the permit
Task- 6.53
Task- Moving and stowing 200 litre drums.
Outcome-Learnt how to move a 200 lt drum from one place to another using all safety precautions.
Task- 6.54
Task- Lifting 20 ltr.paint drums and stowing on the rack.
Outcome– Learnt how to stow & move a 20 lt drum using all precautions.
Task- 6.56
Task- Moving o2 cylinders and acetylene cylinders .
Outcome-Learnt how to move oxygen & acetylene cylinders using trolley & using two men lift.
Task- 6.58
Task- Lifting and shifting of various types of pipes.
Outcome- Learnt how to lift & shift various sizes of pipes from one place to another onboard a vessel.
Task- 6.61
Task- Identify and segregate garbage on daily basis.
Outcome-Learnt how to identify & segregate garbage on a daily basis in work area on the ship. Learnt how to follow the garbage management plan onboard every vessel.
Task- 6.62
Task- Prepare garbage drums and stencil work.
Outcome-Learnt how to prepare, paint & stencil garbage drums for the purpose of garbage segregation using the color coding system as per garbage management plan of your ship
Task- 6.63
Task- Understands connection of bunker hose to manifold using reducer.
Outcome-Understood the procedure for bunkering & what precautions are to be taken while bunkering.
Task- 6.64
Task- Importance of closing all deck scuppers and drain plugs.
Outcome- Understood the use of deck scuppers & drain plugs & why it is necessary to close the deck scuppers & drain plugs in drip trays on deck during bunkering on any ship & during loading/discharging on tankers
Task- 6.65
Task- Identify all SOPEP locker equipment.
Outcome– Understood the use of SOPEP equipment & SOPEP locker.
Task- 6.66
Task- Rig and use air driven pump.
Outcome- Understood the use of air driven pump & what is the importance of collection of spilt oil & use of oil spill dispersants.
Task- 6.67
Task- Conduct of oil spill drill and explain duties to all onboard the vessel.
Outcome- Understood how an oil spill drill is conducted onboard ships & related duties of each individual during an oil spill drill